omron — Creating a Part Buffer Configuration

Configuration, Editor Parameters, and Online Help Object Menu Help Displays the online help for the object editor. Refresh Editor Refreshes the contents of the object editor window. Close Closes the object editor. Configuration, Editor Parameters, and Online Help The middle portion of the Part Buffer editor contains the Configuration drop-down list box, Configuration editor items, and online help for the editor parameters. Configuration Drop-down List Box The Configuration drop-down list box is used to specify how the part buffer is used by the system. The choices are: l Static - parts are placed at a static location, such as a part feeder or a pallet.

Properties Editor The Properties editor is used to specify the configuration for the type of part configuration selected. Each item is described in the online help for that item. For details, see Creating a Part Configuration . Online Help The bottom part of the Part Buffer object editor displays online help for the selected parameters. NOTE: Because online help for each parameter is provided directly in the editor, it is not duplicated in this documentation. Creating a Part Buffer Configuration This section describes how to create a part buffer configuration. Static Configuration To create a Static configuration: 1.

The Configuration drop-down list box is used to specify how the part buffer is input to the system. Use the drop-down list box to specify "Static". ACE User's Guide, 3.6.x, 18316-000 Rev A Page 837