omron — Configuration Items

Configuration Items Robot Position Editor (Simple Position Editor) Enhanced Editor Parameters The upper portion of the enhanced position editor contains the editor parameters grids. These are used to configure various settings on the selected position. The area below that displays online help for the selected parameter. NOTE: Because online help for each parameter is provided directly in the editor, it is not duplicated in this documentation. The bottom area of the enhanced position editor contains the Location editor and Monitor Speed control. l Location editor: used to enter or teach the location information. l Monitor Speed control:

sets the speed for any moves initiated by the Move button. The following are examples of the various enhanced parameter grids: Move Configuration These parameters control the configuration of the robot at the selected location. For example, if your workcell con- tains a SCARA robot (such as the Adept Cobra s600) and you want it to be in a "lefty" configuration, you would set the Righty-Lefty parameter to "Lefty". The Use Current button allows you to take a snapshot of the robot configuration and apply those settings to the parameters.

Approach/Motion/Depart Segment Move Parameters These parameters control how the robot moves to and from the selected Part, Vision Refinement Station, or Part Target location. They allow you to "fine tune" the robot ACE User's Guide, 3.6.x 18316-000 Rev A Page 860