omron — Control Sources

Control Sources The following are other Control Sources examples: ACE User's Guide, 3.6.x, 18316-000 Rev A Page 871 Item Description Interval setting is displayed in millimeters (mm) and as a % of the field of view. Trigger Signal Specifies the signal number to use for the vision trigger. When the specified trigger signal number is activated, a new vision image will be acquired. Use Custom Pro- gram If you want to use a custom V+ program to control the selected belt, select Use Custom Program in the Belt Control group. For details, see Control Sources on page 869.

Overlap Con- figuration When a part is located in an image associated with a conveyor, the position of the object is compared with the position of objects located in previous pic- tures that were acquired at upstream belt positions. If Disable Overlap Check is selected, all overlap checking is disabled. When this option is selected, the remaining Overlap Configuration items are not available (grayed-out). If the newly-located part is within the specified Overlap Distance of a pre- viously-located part (accounting for belt travel), the part is not considered a new part but, rather, a previously-located part that has advanced along the belt.

If "Perform overlap check with instances of different types" is selected, the overlap calculation will check for overlap of any parts, rather than just parts of the same type.