omron — Process Strategies

Process Strategies ACE User's Guide, 3.6.x, 18316-000 Rev A Page 883 Item Description Skip RateThe robot should process instances to maintain an even flow of instances not processed. Relative Belt PositionProcess instances that are separated by a certain distance. Pick / Skip PalletsProcess a certain number of pallets then skip a cer- tain number of pallets. Queue Size Specifies the queue size for the robot. Each robot has a queue size, which rep- resents the maximum number of parts (Part instances) or targets (Part Target instances) that can be sent to the robot. Each part and target is associated with a different queue for a given robot.

Therefore, this parameter defines the size of each queue. This parameter defaults to 10. To change the parameter, enter the new value into the Queue Size field, or adjust the value using the up/down arrows. Allocation Distance Specifies the distance upstream from the belt window that a part instance must be within before the system is allowed to allocate that part instance to the robot. Allocation Limit The distance from the pick line beyond which instances will not be allocated. If set to zero, instances will be allocated if they are at or upstream of the l pick line.

If greater than 0, it represents the upstream distance (in mm) from the l pick line an instance must be for it to be allocated. This parameter is useful in the case of fast-moving belts where the robot needs additional "look ahead" to process instances. Use Custom Alloc- ation Allows you to specify a Custom Allocation Script. The Custom Allocation Script provides two different entry points that are called: One is for allocating "non- belt" instances (parts and targets); the other is for "belt" instances. The pro- gram can manipulate the lists to indicate to the system what should be alloc- ated to a given robot. This is called by the Process Manager when it needs to allocate parts.

If this option is selected, click the browse icon ( ) to select the desired Custom Allocation Script. Wait Mode Parameters: Stay at current position Causes the robot to remain at the current position while waiting for a part or tar- get to process. Move to idle pos- Causes the robot to move to the idle position after the specified "After waiting