Processes Use the Up/Down arrows to change the order of the tip processing. Properties Tab: Place Configuration Group The Place Configuration group is used to specify the single- or multi-place Part Target items for the pick- and-place process, as follows: l Single Place: Select this item for a single-place application (only one place-motion is performed). Use the field below to browse for the part target that will be placed. l Multi Place: Select this item for a multiple-place application (multiple place-motions are per- formed). Use the field below to specify the tool tip and part target for each element of the place pro- cess.
Use the Up/Down arrows to change the order of the tip processing. Single and Multiple can be used together. For example, if you want to pick multiple parts individually and then place them all at the same time, you would use Multiple Pick and Single Place. Advanced Tab: Enable Refinement The Enable Refinement option is used to apply a vision refinement to the picked part. When this option is selected, the part is moved to a predefined vision refinement station for additional processing before being moved to the place (part target) location. For more details on defining the vision refinement station, see Vision Refinement Station on page 941.
The following items are used to specify single- or multi-part refinement: ACE User's Guide, 3.6.x 18316-000 Rev A Page 892