omron — Processes

Processes For example, let's say you have three processes defined in the Process Manager, as follows: 1. Pick from input (Part), place to output (Part Target) 2. Pick from Part Buffer, place to output (Part Target) 3. Pick from input (Part), place to output (Part Buffer In this case, the Process Manager would always execute process #1, if there are parts at the input, and move them to the output. If no parts are present at the input, it will then check for process #2 and #3. However, if you change the order (and, therefore, the priority), you will get a different behavior, as follows: 1. Pick from Part Buffer, place to output (Part Target) 2.

Pick from input (Part), place to output (Part Target) 3. Pick from input (Part), place to Part Buffer In this case, the Process Manager will always remove parts from the Part Buffer, until no parts remain in the Part Buffer, before processing the input (Part). Teaching a Process The last step in creating the application is to teach the process. This is done using the Teaching Process wiz- ard. For details on the buttons and indicators on the wizard pages, see Wizards on page 181. NOTE: The following process illustrates the steps for a basic pick-and-place application.

The steps in your wizard will vary, depending on the application and types of Parts and Part Targets you have defined for your application. If a Process Pallet is used for a Part or Part Target, you will see additional screens in the wizard for teaching the pallet frame (the orientation of the pallet in the workspace) and the first position in the pallet. Each of these steps contain an image of the pallet item being taught, which provides a visual reference. Frame Origin Frame X-axis Frame Y-axis First Pallet Position For more details on a Process Pallet, see Process Pallet on page 927. To access the Teaching Process wizard: 1.

Click Teach in the Processes group of the Process Manager editor. The Teaching Process wizard ini- tializes and opens the first page of the wizard. ACE User's Guide, 3.6.x 18316-000 Rev A Page 894