omron — Processes

Processes NOTE: If the Robot Jog Control is open when Move is clicked, the Robot Jog Control tem- porarily switches to Comp (computer control) mode while the move is executed. When the move has completed, the Robot Jog Control switches back to its previous mode. 3. Click Next to proceed. The Teach the Part Position screen opens. Teaching a Process (Teach the Part Position) a. Click Pendant to display the Robot Jog Control. b. Use the Robot Jog Control to move the robot to the Part position. c. (Optional) You can adjust the Approach Height and Depart Height, using positive or negative values, as needed.

You can also select the Absolute check box, if you want the values to be ACE User's Guide, 3.6.x, 18316-000 Rev A Page 897