Processes absolute values instead of relative to the taught position. WARNING: When the Absolute option is selected, you must ensure the approach/depart heights are set correctly. Otherwise, the robot could move to an unintended location or out of range, which may damage the robot or other equipment in the workcell. d. Click Here to record the position. e. (Optional) Click Edit to adjust the recorded (taught) robot location. The following window opens: Edit the location values and then click OK to close the window. f. (Optional) You can use the Robot Jog Control to move the robot away from the recorded (taught) position, and then click Move to move the robot back to the taught position.
When there is a difference (offset or shift) from the current position to the taught position, that dif- ference is shown in the Offset (Shift) From Taught Location field. ACE User's Guide, 3.6.x 18316-000 Rev A Page 898