omron — Controlling an Application

Controlling an Application Controlling an Application The Process Manager toolbar or Task Status Control allows you to control (start and stop) the operation of the selected application, as follows: 1. Use the drop-down list box to choose the Process Manager (application) you wish to use. 2. Click Start . The Start button dims, the application initializes and the Process Manager establishes communication with the hardware components. During initialization, the Hardware group items will look similar to this: ACE User's Guide, 3.6.x, 18316-000 Rev A Page 925 Item Description Item Description Retry These buttons, and their functions, are enabled and con- trolled by the V+ error message.

Skip Abort Instances This tab displays information on the parts and part targets that are asso- ciated with each control source. Instances Tab with Part Instances When the tab is initially selected, the list is refreshed. After that, you must use the Update button to view the latest results. This is done to conserve system resources. The information can be removed using the Clear button. This clears the information for this tab only. To remove all information, use the Clear but- ton at the top of the Process Manager Control. Item Description Retry These buttons, and their functions, are enabled and con- trolled by the V+ error message. Skip Abort