omron — Menu Items

Vision Refinement Station Vision Refinement Station This section describes the Vision Refinement Station option on the Process menu. NOTE: The following information assumes you have already installed a physical camera, created a vir- tual camera, calibrated the camera, and created a vision tool and model. For details, see the ACE Sight User's Guide . The Vision Refinement Station object defines a location with an upward-mounted camera that is used to improve the part-to-gripper orientation for more accurate placement of the part. For more details on vision refinement, see Selecting a Refinement Mode on page 943.

To create a Vision Refinement Station object, right-click in the folder area of the Workspace Explorer and select New > Process > Vision Refinement Station from the menu. The Vision Refinement Station object is added to the Workspace Explorer and the Vision Refinement Station object editor opens. You can also open the Vision Refinement Station editor by double-clicking the Vision Refinement Station object in the folder area of the Workspace Explorer. Vision Refinement Station Editor After you create the object, you can set the motion parameters (how the robot moves to and from that loc- ation) using the location editors. For details, see Location Editor Types on page 858.

Menu Items This section describes the selections available from the Vision Refinement Station editor menu. ACE User's Guide, 3.6.x, 18316-000 Rev A Page 941