To program the application: next page. c. Adjust the camera properties. For details, see the ACE Sight User's Guide . Click Next to pro- ceed. The interview wizard records the camera adjustments and opens the next page. d. Perform a Grid Calibration of the camera. Click Launch Grid Calibration to begin the pro- cedure. For details on performing a grid calibration, see the ACE Sight User's Guide . Click Next to proceed. The interview wizard records the camera calibration and opens the next page. 5. Select the belt (conveyor) encoder. Selecting the Encoder a. Click the encoder you wish to use in your sample application.
You can quickly locate the encoder by activating the conveyor and watching the Encoder Position column—the count for the corresponding encoder should change when the conveyor is running. b. Click Next to proceed. The interview wizard records the encoder information and opens the next page. 6. Teach the picture-taking position. This is the location to robot will move to when a picture is taken. The robot must be out of the camera field-of-view (FOV), so the image is not obscured by the robot. a. Move the robot to a location that is out of the camera field-of-view (FOV). b. Click Here to record the position. ACE User's Guide, 3.6.x 18316-000 Rev A Page 970