3. Maintenance Manual 3-11 Maintenance 4. Fill oil a. Fill an appropriate amount of oil as required. Oil specification: quality grade of API SN. Oil viscosity: viscosity grade of SAE 5W-30. The maintenance filling volume for replacement of the filter: 4L (check the oil dipstick scale). b. When the engine is running and the normal temperature is reached, check that there is no oil leakage from the oil filter and drain bolt. c. Leave the vehicle on a flat ground, turn off the start switch, wait for three minutes to allow the oil to flow to the oil sump, pull out the dipstick, wipe it with a clean rag and reinsert the dipstick to the bottom. d.
Pull out the dipstick again, and the oil level should be between the upper mark H and the lower mark L. VOYAH FREE