3-14 Maintenance 3. Maintenance Manual 3.1.4.4 Replacement of brake fluid NOTE: - When replacing the brake fluid, the brake fluid approved by the Company must be used. - Do not mix brake fluid with other mineral oils, which can damage the seals of the brake system. - Brake fluid is toxic and corrosive, so never spill it onto the body paint. - Brake fluid is highly hygroscopic and will absorb moisture from the surrounding environment and must be kept tightly sealed. 1. Replace the brake fluid a. Unscrew the brake fluid reservoir cover ① in the direction as indicated by the arrow. b. Pump out the brake fluid from the brake fluid reservoir. c. Add new brake fluid to the brake fluid reservoir.
d. Have the brake fluid replaced by two technicians. e. Lift the vehicle. f. Remove the seal covers of the brake caliper bleed bolts and install the collection container. g. Loosen the bleed bolts of the brake calipers, with one mechanic depressing the brake pedal in the vehicle and another mechanic below loosening/tightening the bleed bolts. Tightening torque of bolt: 12±1Nm. VOYAH FREE