en Accessories 5 Accessories Use original accessories. These have been made especially for your appliance. Accessories Use you remove the door or door panels from the appliance. 5.1 Other accessories 5.3 Sliding accessories into the cooking compartment You can purchase other accessories from our after- sales service, specialist retailers or online. You will find a comprehensive range of products for your appliance in our brochures and online: www.bosch-home.com Accessories vary from one appliance to another. When purchasing accessories, always quote the exact product number (E no.) of your appliance.
You can find out which accessories are available for your appliance in our online shop or from our after- sales service. 1. Turn the accessory in such a way that the notch is at the rear and is facing downwards. 2. Insert the accessory between the two guide rods for a shelf position. Wire rack The open side must be facing the appliance door and the curvature must be at the bottom (i.e. ). Other accessories Use Telescopic rail set Telescopic rail set for one level Pressure regulator Pressure regulator for li- quid gas 5.2 Locking function Tray, e.g.
uni- versal pan or baking tray The sloping edge of the accessory The locking function prevents the accessories from tilt- ing when they are pulled out. You can pull out the accessory approximately halfway without them tipping. The accessory must always be in- serted into the cooking compartment the right way round for the tilt protection to work properly. must be facing towards the ap- pliance door. 8 Wire rack ¡ Cookware ¡ Cake tins ¡ Meat, e.g. roasting joints or steak ¡ Frozen meals Baking tray ¡ Tray bakes ¡ Small baked items Telescopic rail set Use the pull-out rails to pull the accessory out further. Rotary spit ¡ For roasting pieces of meat ¡ For roasting large items of poultry Note:
Use only in combination with the enamelled baking tray. Locking pins Lock hinges. Note: Do not throw away the locking pins. Store the locking pins in a secure location. You always require the locking pins when