Operation 3.4. Transporting the machine 3.4. Transporting the machine If you have to transport the machine over far distances, either use a low bed loader or a railway wagon. You may lift the machine onto the transport vehicle. Optionally, you may drive it onto the low bed loader or railway wagon via loading ramp (also refer to "2.2.3. Transport" on page 2-19). Before you start driving, check that the following requirements are fulfilled: the roads are broad enough, the bridges are wide enough, the clearance heights of tunnels and the like are sufficient, the carrying capacities of roads and bridges are sufficient.
When transporting the machine, observe all related laws and reg ulations, and be careful to assure safety. 3.4.1. Securing the articulated steering Secure the articulated steering before you lift up the machine or start to perform repair measures. 1 1. Set the machine to straight driving. 2. On the left: Loosen the spring bolt and remove the bolt (1). 3. On the right: Insert the bolt (2) and secure by means of the spring bolt. 2 WA90-5 – VEAM270100 3-79