DRESSTA TD-25H — 2.2. BEFORE STARTING THE ENGINE

SECTION 2 SAFETY PRECAUTIONS Page 4 GENERAL Fig. 2.1. Fire Extinguisher Location Do not jump on or off the machine. Keep two hands and one foot or two feet and one hand in contact with the steps and grab handles and rails at all times. Electrical system is 24-volt negative ground. Each machine is equipped with a starting receptacle. It should be used when starting the machine using booster batteries. In case the receptacle cannot be used the following precautions must be taken to minimize chances of injury or damage to electrical parts. 1. Turn the system master switch to the OFF position. 2.

Attach one end of the jumper cable to the positive terminal of the booster battery and the other end to the positive terminal of the machine battery. 3. Attach one end of the second cable to the negative terminal of the booster battery and the other end to the machine's frame away from the battery. 4. To remove the cables, reverse the above sequence exactly to avoid sparks near the battery. A frozen battery can explode when the booster cables are attached. NEVER check battery charge by placing a metal object across the battery posts. Sparks can cause an explosion. Use a voltmeter or hydrometer for checking. Each new machine is equipped with a fire extinguisher, first aid kit and safety belt.

2.2. BEFORE STARTING THE ENGINE Never start the engine indoors unless proper exhaust ventilation is provided to remove deadly exhaust gases. Once the engine is operating, move the machine outdoors as soon as possible. Exhaust gases are dangerous and can cause unconsciousness and death. Always place the transmission shift lever in neutral, apply the transmission neutral safety lock and lock the parking brake before starting. TD-25H DRESSTA