MAINTENANCE 4.3 FUEL AND LUBRICANTS 4.3 FUEL AND LUBRICANTS G *1) DO NOT mix ZINC-FREE Hydraulic oils with Hydraulic oils containing Zinc. DO NOT mix Mineral Hydraulic oils with Synthetic Hydraulic oils. Mixing of the above oils, will reduce anti wear properties and oxidation stability of the oil. Quick plugging of the oil filters in the hydraulic system will occur. NOTICE G *2) Refer to the chart ”Gear Oils” in part 3 of this binder for the released gear oil qualities and viscosity grades. REMARK The lubricating instructions in this book refer to the recommended grade specifications. Damages caused by using lubricants other than specified are not covered by the manufacturer’s warranty.
285 Point of Lubrication Lubricant Ambient Temperature °C Viscosity Grades Quality Grades DIN/API Engines Refer to ENGINE OPERATION AND MAINTENANCE MANUAL for Specifications of Engine Oil, Coolant and Fuel. Hydraulic System Hydraulic oil “HLP or “HLPD” with ZINC anti-wear additives *1) - 20 to + 11 22 - DIN 51524 T.2 and T.3-HLP -14 to + 21 32 or 32 - 68 - 6 to + 31 46 0 to + 40 68 + 5 to + 48 100 - Travel gears and Swing gears Hydraulic oil "HLP” - 40 to + 10 HLP T32 DIN 51524.
T.2 and T.3- HLP Gear oil ”CLP” *2) -15 to + 50 CLP 220 DIN 51517 3 - CLP Brake housings and Motor adapter hous- ings of Travel Gears Engine oil all SAE 10 or Hydraulic oil HLP 22 or HLP 32 DIN 51524T.2 and T.3- HLP PTO’s (Pump distrib- utor gears) Hydraulic oil ”HLP” - 40 to + 10 HLP T32 DIN 51524. T.2 and T.3- HLP Gear oil ”CLP” *2) -15 to + 50 CLP 150 DIN 51517 3 - CLP Fan bearing hous- ings of Radiators and Hydraulic oil coolers Gear oil ”CLP” all CLP 150 DIN 51517 3 - CLP