4.3 FUEL AND LUBRICANTS MAINTENANCE NOTICE The Air Conditioning must be filled with refrigerant ”R134a” through authorized Service Specialists only. DO NOT use refrigerant ”R12”, otherwise serious damage on system com- ponents could occur. The lubrication oil for the refrigerant compressor must be compatible with ”R134a” refrigerant. 286 Point of Lubrication Lubricant Ambient Temperature °C Viscosity Grades Quality Grades DIN/API Grease Fittings (manual lubrication) Multi-Purpose Grease ”MPG” Refer to the Lubricant Chart in Part 3 for the recommended Multi- Purpose Greases. The part numbers of recommended Multi-Purpose Greases are listed in the Parts Catalog.
Central Lubrication System Swing Circle Teeth (manual lubrication) Adhesive Lubricant Refer to PARTS & SERVICE NEWS, Bulletin No. AH00519 in Part 3 for the recommended Adhesive Lubricants. The part numbers of the recommended Adhesive Lubricants are listed in the Parts Catalog. Swing Circle Pinion Lubrication System Track rollers, Carrier rollers and Idler wheels Gear oil ”CLP" or ”API” all all CLP 220 SAE 90 DIN 51517 3 CLP API GL 5 Flexible couplings Engine oil ”API” all SAE 15W-40 API CD+SF Air conditioning system Refrigerant R 134a REMARK The Air Conditioning is prepared for Refrigerant ”R134a” only. Observe Notice below. Refrigerant compressor Special oil See Note below.