Ch 2 page 207 TRANSMISSION Install the input flange (1) until contact. Figure 658 Fasten the input flange (3) by means of washer (1) , hexagon screws (2). and lock washer (4) from machine 7X1739 / 8X1713 4 Prior to the reassembly oil the hexagon screws. Tightening torque (M8/10.9x55) MA = 68 Nm NOTE New hexagon screws have generally to be installed! Figure 659 Insert the converter by means of the lifting tackle, until the cover (1) is installed to the converter bellhousing (2). Figure 660 Bolt together the converter bellhousing and the cover b means of the hexagon screws M10x50 and hexagon nuts M10 (1).
Pay attention to the radial installation position, see markings made at disassembly (arrows)! Tightening torque (M10/ 8.8) MA = 46 Nm Figure 661 SHOP MANUAL