TRANSMISSION Ch 2 page 208 Planetary drive “F” By means of a suitable pressure piece, press the ball bearing 60x110x22 (1) into the planet carrier until contact. Figure 662 Insert driving pins 23.7x4.7 (1) with grease into the sun gear. Assemble the pressure rings (2). Installation position of pressure rings – see Figure 663! Figure 663 Insert the remaining driving pins 23.7x4.7 (1) with grease into the sun gear. Figure 664 Installation position of pressure rings. Legend: 1 = Sun gear 2 = Driving pins 6x 3 = Pressure rings Figure 665 SHOP MANUAL