UPPERSTRUCTURE / Pump Device Installation IMPORTANT: When removing the pump device from the engine, replace the coupling of engine and pump device. Do not reuse the coupling. 1. Apply LOCTITE #262 to socket bolts (69) (10 used). Install coupling (68) to the engine with socket bolts (69) (10 used). : 8 mm : 49 N m (5.0 kgf m, 36 lbf ft) 2. Insert coupling (66) until spline end surface (A) in the pump device comes in contact with hub end surface (B) in coupling (66). Install coupling (66) to the pump device with socket bolts (67) (2 used). W1J1-02-04-048 68 69 : 12 mm : 150 N m (15.3 kgf m, 110 lbf ft) Pump Device W1J1-02-04-047 66 67 A 67 B W2-4-7