UPPERSTRUCTURE / Engine 9. Install hose (76) to the pipe in engine. Tighten nut (75). Tighten hose (76) with band (74). Install pipe (69) to bracket (73) with clamp (72) and bolts (71) (2 used). : 17 mm : 50 N m (5.1 kgf m, 37 lbf ft) : 11 mm 10. Install connector (70) to intake-air temperature sensor (68). 11. Pull in harness (78) through the pump space. Install clips (80) (2 used) in harness (78) to bracket (77) with bolts (79) (2 used). W1J1-02-14-006 W1J1-02-14-021 78 : 17 mm 79 : 50 N m (5.1 kgf m, 37 lbf ft) 80 77 W1J1-02-04-046 W2-14-16 71 72 65 64 69 76 75 74 73 71 72 65 64 73 70 68