INSTRUMENTS AND CONTROLS OPTIONAL PATTERN CONTROL SYSTEM 2 - LEFT WHEEL TRAVEL, STEERING AND ARM LIFTING CONTROL LEVER DANGER Before carrying out any manoeuvre with this lever, the operator must be seated in the work position with fastened safety belt; before every manoeuvre the operator must take all the precautions indicated in “3.6.5 HOW TO MOVE THE MACHINE” and “3.13 USING THE EQUIPMENT”. Before moving, make sure that the parking brake is disengaged. When travelling on roads, always lock the equipment control (see “3.3.5 pos. 8 EQUIPMENT CONTROL LOCKING LEVER”). When travelling on roads, make sure that all the safety devices have been engaged.
Before leaving the work position, lower the equipment to the ground and lock the safety bars (vertical position), then stop the engine. Failure to comply with these rules may lead to serious accidents. N - Neutral A - Forward right steering B - Arm lowering C - Reverse right steering D - Arm lifting 85 The travel control lever (2) is positioned on the operatorís left and serves to control the forward and reverse movements, the steer- ing of the machine to the right, the arm lifting and lowering func- tion, according to the movements indicated in the diagram.
IMPORTANT IMPORTANT • To move the machine forward or backward, shift the control levers (2) and (3) at the same time and in the same direc- tion. F A D N B C R RWA32220