. OPERATION EXPLANATION OF COMPONENTS CHECK MONITOR SYSTEM MONITOR SYSTEM 3 - 7 NOTICE Stop the machine on level gro und and carry out the monito r che Stop the engine, then turn the starting switch to the ON position and check that the lamps light up for approx. 2 second s. I they do not light up, please as k your Komatsu distributor t o carr y out When carrying out the checks before starting, use the monit or system 1. Turn the starting switch to 2. Check that the monitor liq up for 2 seconds, the alar "KOMATSU" appears for panel B (multi-information 3. After 2 seconds, the displayed on liquid-cry After 2 seconds, the la After 3 seconds, the op panel B (multi-informat 1.
Turn the starting switch to 2. Check that the monitor liq uid crystal display and lamps al l ligh up for 2 seconds, the alar "KOMATSU" appears for panel B (multi-information After 3 seconds, the op panel B (multi-informat REMARK dicate any problem. he preheater is being operated does not go out until preheating is The following cases do not in In cold weather when t preheating pilot lamp (4) completed. When the time has come to maintenance caution lam change the oil or replace the filters p (5) lights up or flashes for 30 seconds, and the mainten panel B (multi-information) ance item is displayed on display (1).