OPERATION MONITOR CHECK ITEMS Below is a list of monitor items that must be checked during start-up and operation of the machine. It is important to understand what these alerts mean and how to deal with them. Failure to do so may lead to a system failure with in the machine. Emergency Alerts If the monitor lights up red, stop the engine immediately or run at low idle, check applicable location, then perform necessary actions. These items should be observed while the engine is running. If there is a problem, the monitor for the abnormal location lights up red and buzzer sounds, if this happens perform actions immediately. 1. Engine coolant monitor 2. Hydraulic oil temperature monitor 3.
Engine oil pressure monitor Engine Coolant Temperature Monitor Monitor (1) warns operator that the engine coolant temperature has risen. If engine coolant temperature becomes abnormally high, monitor lights up red, overheat prevention system is automatically actuated, and the engine speed goes down. Stop operations and run engine at low idle until monitor (1) changes to green. 2-10 PC350LL-7E0