www.WorkshopManuals.co.uk Service Tools (cont'd) Section B - Body & Framework Long Knife - used to give extended reach for normally inaccessible areas. Braided Cutting Wire - consumable heavy duty cut-out wire used with the glass extraction tool (above). JCB part number - 892/00849 (approx 25 m length) JCB part number - 892/00844 S186330 S186360 Rubber Spacer Blocks - used to provide the correct set clearance between glass edge and cab frame. Nylon Spatula - general tool used for smoothing sealants - also used to re-install glass in rubber glazing because metal tools will chip the glass edge.
JCB part number - 926/15500 (unit quantity = 500 off) JCB part number - 892/00847 S186470 S186550 Slide Hammer Kit - 993/68100 1 :993/68101 Slide Hammer 6 :993/68106 Adaptor - M20 x M24 2 :993/68102 End Stops 7 :993/68107 Bar - M20 x M20 X 800MM 3 :993/68103 Adaptor - M20 x 5/8" UNF 8 :993/68108 Adaptor - M20 x 7/8" UNF 4 :993/68104 Adaptor - M20 x 1" UNF 9 :993/68109 Adaptor - M20 x M12 5 :993/68105 Adaptor - M20 x M20 10 :993/68110 Adaptor - M20 x 5/8" UNF (Shoulder) 11 :993/68111 Adaptor - M20 x 1/2" UNF 2 2 11 5 1 2 6 4 3 9 10 8 7 S196910 9803/3280 Purchased from www.WorkshopManuals.co.uk Issue 1 Section 1 General Information Section 1 4 - 3 4 - 3