12. OPERATION 12.9 HANDLING ACTIVE MODE Make full use of the active mode to match the purpose and conditions of the operation in order to carry out operations effectively and efficiently. The active mode selector switch can be turned ON (lights up) in order to provide quick leveling operations and effective deep dig- ging and loading operations. ON lights up: Active mode ON ON goes out: Active mode cancelled The ON lamp is off when the engine is started. If it is turned ON (lights up), it is possible to enter the active mode from any working mode. Even when it is turned ON (lights up), the working mode display does not change.
When the lamp goes out, the system returns to the original working mode. Mode Effective operation O OO AD324270 Advantages for operation The boom lowering speed is increased and the amount of lift of the work Active mode ° Digging and Ing Leveling equipment when raising the boom and swinging is increased, so the cycle time for deep digging operations is reduced. By increasing the arm IN speed and the pump response, the speed of rough leveling (light loads) is increased. NOTICE There is danger that the hydraulic equipment may be broken if breaker operations are carried out in the active mode, so never use the active mode for breaker operations.
REMARK e e Use the active mode with the fuel control dial turned to the MAX position. If it is not at the MAX position, it will be impossible to achieve a suitable increase in the work equipment speed. Active power-up function When finishing ground quickly with heavy loads or digging deep and loading, use the active power-up function according to the following procedures. 2-69