I SAFETY PRECAUTIONS a WARNING: Failure to follow these safety precautions may lead to a serious accident. PROTECTION AGAINST FALLING OR FLYING OBJECTS If there is any danger of falling or flying objects hitting the opera- tor, install protective guards in place to protect the operator as required for each particular situation. For work with breakers, install a front guard on the wind- shield. Also, place a laminate coating sheet over the wind- shield. For demolition or shear work, install a front guard on the windshield and a top guard on the cab. Also, place a laminate coating sheet over the windshield.
I A0055201 I For work in mines, quarries, demolition, tunnels or other places where there is danger of falling rocks, put FOPS (fall- ing object protective structure) in place. Also, place a lami- nate coating sheet over the windshield. The above comments are made with regards to typical work- ing conditions. By all means you should put on other guards if required by conditions at your particular site. For details of safety guards, please contact your Komatsu distributor. A008431 1 Also, even for other types of work, if there is any danger of being hit by falling or flying objects or of objects entering the operator’s cab, select and install a guard that matches the working conditions.
Be sure to close the front window before commencing work. (C) Level 1 acceptance is intended for protection from small fall- ing rocks, flying objects and other debris encountered in oper- ations such as highway maintenance, landscaping and light construction site services Level 1 Guards: AB30052C o Fitted directly onto the roof and front of the cab. (B): Top guard I (C): Front guard (I) 19