Assembly Procedure PC8000 Assembly Site Requirements Well levelled and compacted ground appr. 150 x 150 ft/50 x 50 m A container to store the tools, to keep the paper work and for sheltering 2 mobile cranes min. load capacity 150 metric tons 1 small crane, load capacity appr. 25 metric tons PC8000AS rev 02.doc 11 Edition 01/2004 Qty.
Specification Designation 01 8 metric tons Telescopic fork lift 04 6 metric tons Chain pull 04 35 metric tons Shackles 04 5 metric tons t Shackles 04 1 metric ton Shackles 04 Piece M 10 - M 30 Eye bolts 01 M20 Whirl (backhoe attachment only) 04 30 metric tons - 8 m length Ropes 04 25 metric tons - 8 m length Ropes 04 16 metric tons - 8 m length Ropes 04 12 metric tons - 8 m length Ropes 01 50 mm - 1200mm length Push bar 01 10 mm x 3500mm length Push bar 01 5 kg Hammer 30 300 x 300 x 1000 mm Wooden blocks 10 300 x 300 x 2500 mm Wooden blocks 02 10- 50 t Hydraulic jacks 01 50 m Cable drum 01 2 x 100 m 4 pole cable for temporary connection to 380 V 01 6 mm - 46 mm Combination spanner 01 50 mm - 75 mm Open end spanner 01 30 mm - 75 mm Combination spanner 01 3/4“ Impact wrench 01 1/2“ Impact wrench 01 1/2“ Ratchet 01 3/4“ Ratchet 01 13 mm - 19 mm Sockets 01 24 mm - 36 mm Socket 01 0 - 7800 Nm Hydraulic torque wrench 01 0 - 250 Nm Torque wrench 01 25 - 60 Nm Torque wrench 01 250 – 500 Nm Torque wrench 01 Hand drill