c. Install the nozzle holder body (1) onto the plate with the cap nut side facing downward. 1 EQM4031I d. Assemble adjusting shim (10), secondary 12 spring (11), and spring seat (12) on the noz- 10 11 zle holder body in the order as described. NOTE : The secondary spring is the same one as the primary spring. EQM4032I e. Assemble the pin (14), lift piece (13), and spacer (15) with the nozzle holder body. 13 14 15 EQM4033I f. Install the pin (16) and nozzle (A) onto the spacer. 16 A EQM4034I - 141 - MAINTENANCE OF MAJOR COMPONENTS