2.18. Turbocharger The turbocharger needs not arty special equipment. Every time of engine replacement, a leakage or clogging of oil pipes should be inspected. Air cleaner should be maintained carefully for nut or foreign material not to get in. Periodic inspec- tion should be applied on the compressed air and exhaust gas pipes, For leaking air will bring During the operation that is surrounded by the dust and oil mixed air, frequent cleaning must the overheat engine, an immediate repair must be done. be done on the impellers. Tear down the impeller casing (attention: be careful not to bend) and must clean with non-acid solvent solution.
If necessary, use plastic scraper If impeller is severely polluted, dip the impeller into solution and may be better to clean it with stiff brush.Then one thing to beware is to dip only impeller part and so do not support by impeller but bearing housing. 2.19. Starting Motor In case of engine maintenance, clean pinion and ring gear thoroughly putting in the fuel, and coat them with grease. Also, In case of washing car and so forth, inspect the wiring state being careful for not to get. - 33 - TECHNICAL INFORMATION