3.1.39. Crankshaft gear and oil pump idle gear Loosen the socket head bolts and take out the oil pump idle gear. Use a puller to remove the crankshaft gear. 3.1.40. Timing gear case Unscrew the case fixing bolts and dis- assemble the timing gear case. EAMD046I 3.1.41. Crank shaft Remove the main bearing cap fixing bolts in the opposite direction of assembling. Maintain the removed bearing caps in the order of cylinders. Temporarily install the bolts at the both side of crankshaft, and lift the shaft with a rope. NOTE : EAMD047S Do not mingle with the metal bear- ings and bearing caps randomly.
To prevent mixing, temporarily assem- ble the metal bearings to the corre- sponding bearing caps in turn. - 59 - DISASSEMBLY