Apply engine oil to an expander and install it onto the special tool (guider). Tighten the bolts until the expander is Expander forced out of the cylinder head bottom. After mounting the nozzle tube, make a hydraulic test to check for water leaks. EAMD099I 3.3.22. Rocker arm assembly Apply lubricating oil to the rocker arm bush and shaft, and assemble the intermediate bracket with the rocker arm using fixing bolts. Semi-install valve clearance adjusting bolts onto the rocker arm. EAMD100I Install the spring, rocker arm, bracket, rocker arm, spring, washer, and snap ring in the described sequence. Install the rocker arm and bracket in the same direction.
EA8M3008 - 87 - REASSEMBLY Test pressure 2 kg/cm2 Torque 4.4 kg.m