REAR WINDSHIELD WIPER You can control rear windshield wiper by pressing wiper washer switch (2) in the switch panel. 1. 1st wiper action (Wiper and washer activate the same time, automatic return) Fuse box (1), to the washer tank (4), to the 5,7 terminal of switch (20) are connected, then activates windshield washers. Also fuse box (1), to the B,L terminal of wiper motor (3), to the diode (5), to the 5,7 terminal of switch (2) are connected, then activates wiper. 1 3 2 6 5 5 4 AJS0170L Figure 11 REAR WINDSHIELD WIPER 1ST ACTION CIRCUIT 2.
2nd wiper action (Only wiper action) Fuse box (1), to the B,L terminal of wiper motor (3), to the 4,2 terminal of switch (2) are connected, then activates wiper. 3. When you turn off windshield wiper switch in 1st or 2nd position, electric current flows fuse box (1), to the B,L terminal of wiper motor (3), to the 4,6 terminal of wiper switch (2), to the diode (6), to the S,E terminal of wiper motor (3).
S0802195K Page 25 Electrical System Reference Number Description 1 Fuse Box 2 Wiper Washer Switch 3 Wiper Relay 4 Wiper Timer Reference Number Description 5 Wiper Motor 6 Washer Tank 7 Diode Reference Number Description 1 Fuse Box 2 Wiper/washer Switch 3 Wiper Motor Reference Number Description 4 Washer Tank 5 Diode 6 Diode