. OPERATION OPERATION ADJUSTING TRANSMISSION CUT-OFF POSITION CAUTION STOPPING WHEN TRANSMISSION CUT-OFF IS ON 3 - 133 Apply the pa rking brake before adjusting the transmission cut -off position. Adjust the amount tha t the brake ped 1. Start th e engine w ith starting swit ch (1), then set par king brak switch (2) to the O N position. ) to the ON position. ust the set position to retur 2. Set tra nsmission cut-off switch (3 ) to the ON positio 3. Depres s brake pe dal (4) and adj o Neutral. position the tra nsmission t 4. Press t ransmissio n cut-off set swi tch (5), then releas e it.
Whe the sw itch is released, the buzz er will soun d with a repeate short s ound, and t he cut-off posit ion is set. Method of canceling cut-off position 5. After th e buzzer s ounds in Step 4 of the adjustment p rocedure the tra nsmission c ut-off switch fla shes for 2 s econd s. While i is flash ing, press t ransmission cu t-off set switch (5) again an releas e it. zzer will sound with a long sound and the adjuste position is canceled. 6.
The bu cut-off position is When the t ransmissio n cut-off switch is ON, if the brake pedal is d epressed, the transmission is returned to Neutra when the b rake pedal is depressed t REMARK When the t ransmissio n cut-off switch is OFF, the transmission is not