SEATING AND CARGO BED 32 8. Flip up front panel and insert stoppers into the slit on both sides. B Cargo Bed Tailgate To avoid personal injury: A Do not apply a load to the tailgate while the tailgate is open, or the wire loop may break. A Do not place fingers or hands between the tailgate and the arm (latch) when closing, or fingers or hands may be pinched. For loading and unloading, the tailgate of the cargo bed can be opened. The tailgate is held level to the cargo bed floor with wire loops. Do not move the vehicle with the tailgate fully lowered. In a fully lowered position, the tailgate may obstruct the vehicle tail lamps and damage them by swinging motion.
(1) Front panel (2) Stopper (3) Slit (4) Pin (A) "RELEASE" 1. Raise the arms (latch) at each end of the tailgate and open the tailgate. 2. Close the tailgate by lifting it and pushing it firmly closed. Push the arms (latch) down to make sure the latches stay securely closed. 9. Release pins on both sides and insert into the holes securely. C 1 row seating to 2 row seating Reverse above procedure. (1) Tailgate (2) Arm (latch) (3) Wire loop