75 PERIODIC SERVICE B Replacing Slow-Blow Fuses The slow-blow fuses are intended to protect the electrical cabling. If any of them have blown out, be sure to pinpoint the cause. Never use any substitute, use only a KUBOTA genuine part. B Checking Hydraulic Tank Suction Strainer 1. Make sure that the hydraulic tank is not damaged and the oil does not leak out of the hydraulic tank. 2. Make sure that the water is not mixed with the oil. 3. When the suction strainer is dirty, wash it with the light oil. C Replacement procedure 1. Disconnect the negative cable of the battery. 2. Open the slow-blow fuse box cover. 3. Pull out the slow-blow fuse. 4.
Insert a new slow-blow fuse into the slow-blow fuse box. 5. Close the slow-blow fuse box cover. 6. Connect the negative battery cable. (1) Hydraulic tank (2) Suction strainer (1) Fuse box cover (2) Slow-blow fuse box cover B Replacing Light Bulb 1. Head lights Take the bulb out of the light body and replace it with a new one. 2. Other lights Detach the lens and replace the bulb. Light Capacity Head lights 37.5 W Tail light 5 W Brake light 21 W Easy Checker(TM) 3.8 W (14V, 0.27A) Turn signal light (front) 20 W (if equipped) Turn signal light (rear) 21 W (if equipped) Work light 27 W (if equipped) Instrument panel light 3.8 W (14V, 0.27A)