OM4041 08/11 Lubrication and Service - Section 40 Page 40-3 10 HOUR (DAILY) INSPECTION Prior to each operating shift, a "walk around" inspection should be performed. Check the truck for general condi- tion. Look for evidence of hydraulic leaks; check all lights and mirrors for clean and unbroken lenses; check opera- tor's cab for clean and unbroken glass; check frame, sheet metal and body for cracks. Notify the proper maintenance authority if any discrepancies are found. Give particular attention to the following:
2 Truck Serial Number Site Unit Number Date ______________________ _______________ _______________ Hourmeter Name of Service Technician _____________ ___________________________________ TASK COMMENTS CHECKED INITIALS CHECK ALL FLUID LEVELS a. Engine Oil- NOTE: Refer to engine manufacturer service manual for oil recommendations. b. Radiator - Check coolant level and fill with the proper mixture as recommended in Coolant Specifications. c. Batteries - Check electrolyte level and add water if necessary. d. Hydraulic Tank - Check oil level in tank, add if necessary. Lube key "C". Refer to Hydraulic Tank Service, in this chapter. NOTE:
Check the oil level with the truck on a level surface, engine stopped, body down, and oil warm. Oil should be visible in sight glass. - Do Not overfill. e. Transmission - Check oil level. Add oil if nec- essary. Lube key "C". Refer to Transmission Oil Level Check in this chapter. f. Fuel Tank - Fill as required. g. Differential - The truck should be on a level surface, and the oil level should be even with plug hole. Refill with oil, as necessary. Lube key "B". CHECK MACHINE FOR LEAKS Inspect all fluid components and piping for signs of leakage.