The starter switch is switched to ST (start) position, but the solenoid switch doesn't work. When the starter switch is switched to ST (start) position, check whether there is voltage at the terminal post "S" of solenoid switch. Yes No Check the grounding cable Check whether the instrument indicator light is normal Good Bad Normal Abnormal Repair Verify the circuit between the starter switch and the terminal post "S" of solenoid There is an open circuit between the battery and the starter switch, or the connection is faulty. Or switch. The sliding part of pinion doesn’t move. The solenoid switch or coil has an open circuit or is burned out.
Repair Check the starter relay The starter switch connection is faulty. Repair or replace the starter. Check the clutch and starter switch Replace the starter switch 16