General Information 00 Initial Maintenance (IM) Operations: 00–03 The Initial Maintenance table lists all maintenance operations that are to be performed at the initial maintenance (IM) interval. Maintenance operation numbers are reference numbers used to help you find detailed instructions in this manual on the main- tenance operations to be performed. All operations listed in the table, along with the operations listed in the applicable M1 maintenance interval table, must be performed to complete the initial maintenance (IM). Initial Maintenance (IM) Operations for Service Schedules I, II, III, and IV Maintenance Operation Number Schedule I: at 1000 miles (1600 km) or 50 hours Schedule II:
at 10,000 miles (16 000 km) Check 00–04 Perform all M1 Operations Schedule III: at 25,000 miles (40 000 km) 31–03 Frame Fastener Torque Check 31–05 Premier 690 Coupling Inspection 32–03 Suspension U-Bolt Torque Check 33–06 All-Axle Alignment Check 40–01 Wheel Nut Check 47–03 Fuel Tank Band-Nut Tightening Table 5, Initial Maintenance (IM) Operations for Service Schedules I, II, III, and IV 122SD and Coronado 132 Maintenance Manual, February 2016 00/8