CAB AND FRAME 2-11 Installation 1. Backlight glass weather strip Legend 1. Deposit 2. Backlight glass 3. Backlight glass weather strip 4. String 5. Backlight glass 6. Section a — a Fit the backlight glass weather strip into the backlight glass. At this time, turn the deposit of the weather strip downward. Caution: Bring each portion into close contact without any float or corrugation. Adjust the backlight glass to the body position. Pushing down the backlight glass from the di- rection (A), pull the string toward (B) and fit the lip into the flange.
To make the contact be- tween the weather strip and body flange better, strike a glass position of about 150 mm from the outside weather strip equally with a ham- mer. 2. Backlight glass N2A0027E Set the string for installing the window shield of φ 5 — 6 mm into the portion (A) of the backlight glass weather strip installed on the backlight glass. Cause the string to go round and cross it about 250 mm in the center on the left of the backlight glass. N2A0029E Legend 1. Lip 2. String 3. Flange 4. Weather strip N2A0028E