. SAFETY SAFETY MAINTENANCE INFORMATION removal or installation not fall. And take steps to support the work of the work equipment and the machine is supported any of the control levers is is damage occurring to the or the machine will there is a hazard that pieces 2 - 36 ATTACHMENTS Appoint a leader before start operations for attachments. Place attachments that have been a s table condition so that they d prevent unauthorized persons fro WORK UNDER THE MACHINE If it is necessary to go under the w to carry out service and main equipment and machine securely enough to support the weight machine.
It i s extremely dangerous to work shoes are lifted off the ground a only with the work equipment. If onl touched by accident, or there hydraulic piping, the work equ suddenly drop. This is extremely the work equipment or the machi NOIS E When carrying out maintenance of th e engine and you are exposed to noise for long periods of time, wear ear covers or ea r plugs while working. loud, it may cause temporary or permanent hearing problems. If t he noise from the machine is too loud, it may cause temporary or permanent h earing problems. WHEN USING HAMMER When using a hammer, pins may fly scattered.
This may lead to serious If h ard metal parts such as pins, b bearings are hit with a hammer, might be scattered and cause ser Always wear safety glasses and When hitting pins or bucket teeth, pieces might be sent flying and in area. Always check that there is n There is a hazard that the pin hit with strong force may fly out and injure peopl e in the surround WELDING WORKS Welding operations must always be carried out by a qualified welder and in a place equipped with pr oper equipment There is a hazard of gas, fire, or elec trocution when carrying out welding, s o never allow any unqua lified personne to carry out welding.