SEBU8726-03 13 Safety Section Crushing Prevention and Cutting Prevention Make sure that all clamps, guards, and heat shields are installed correctly. During engine operation, this check will help to prevent vibration, rubbing against other parts, and excessive heat. i04112191 High Pressure Fuel Lines Regeneration The exhaust gas temperature during regeneration will be elevated. Follow proper fire prevention instructions and use the disable switch function when appropriate. Contact with high pressure fuel may cause fluid penetration and burn hazards. High pressure fuel spray may cause a fire hazard.
Failure to follow these inspection, maintenance and service in- structions may cause personal injury or death. i02143194 Crushing Prevention and Cutting Prevention Support the component correctly when work beneath the component is performed. Unless other maintenance instructions are provided, never attempt adjustments while the engine is running. Stay clear of all rotating parts and of all moving parts. Leave the guards in place until maintenance is performed. After the maintenance is performed, reinstall the guards. Keep objects away from moving fan blades. The fan blades will throw objects or cut objects.
When objects are struck, wear protective glasses in order to avoid injury to the eyes. Chips or other debris may fly off objects when objects are struck. Before objects are struck, ensure that no one will be injured by flying debris. i05768982 Mounting and Dismounting Do not climb on the engine or the engine aftertreatment system. The engine and aftertreatment system have not been designed with mounting or dismounting locations. Refer to the OEM for the location of foot and hand holds for your specific application.