16 Safety Section (D6T LGP (OEM)) WEBM1000 Additional Messages 8 Reference: See Operation and Maintenance Manual, “Maintenance Interval Schedule” for all maintenance recommendations. Diesel Fuel Requirements (6) One of the following messages is located next to the fuel filler cap. 10 Illustration 8 Refer to Operation and Maintenance Manual, “Lubricant Viscosities”. The engine must be shut off before any maintenance is performed. Use a wand in order to clean debris from the fan and baffle assembly. Product Link (5) Illustration 10 This message is located beneath the left window inside the cab. 11 9 Illustration 11 Illustration 9 Use only Ultralow Sulfur Diesel (ULSD) fuel.
The Product Link System is a communication device that transmits information regarding the machine back to Caterpillar and Caterpillar dealers and customers. All logged events and diagnostic codes that are available to the Caterpillar Electronic Technician (ET) on the CAT data link can be sent to the receiving station. Information can also be sent to the Product Link System. The information is used to improve Caterpillar products and Caterpillar services. Note: In Europe, diesel fuels that are identified as meeting “European Standard EN590:2004” requirements for 10 ppm sulfur fuel (typically referred to as “sulfur-free”) generally meet Cat requirements for ULSD fuel.
Refer to Operation and Maintenance Manual, “Lubricant Viscosities” for more information. FCC Compliance (7) The Product Link is also available in cellular format. This message is located on the product link module on the back right ROPS of the cab. Refer to Operation and Maintenance Manual, “Product Link” for more information.