Engine Mounting/Mount Engine On Repair Stand MOUNT ENGINE ON REPAIR STAND RG5965 -UN-05SEP91 03 5 NOTE: If starting motor is to be removed from engine, remove before mounting engine onto repair stand. N CAUTION: Never remove the overhead lifting equipment from the equipment until the engine is securely mounted to the stand and all mounting hardware is tightened to specified values. Always release the overhead lifting equipment slowly. 1. Mount the starter side of the engine to the engine adapter with four 5/8-11UNC Flanged-head, SAE Grade 8 or higher grade cap screws (A). 2. Tighten cap screws to 203 N·m (150 lb-ft). 3. Carefully remove lift sling from engine.
RG,CTM42,G3,2 -19-21MAR95 CTM42 (24MAR95) 03-5 6076 Diesel Engines—S.N. (500000— ) 160101 PN=38