11. EXPLANATION OF COMPONENTS 11.3 CONTROL LEVERS AND PEDALS 1. FUEL CONTROL LEVER This lever is used to control the engine speed and output. Engine stop position: Push the lever fully. Low idling position: Pull the lever from engine stop position 0 until you feel the operating force falls off. Full speed position: Pull the lever fully from low idling position 0. 0 0 0 2. STEERING LEVER This lever is use to steer the machine. If the lever is moved partially in the direction of turn, the machine, the steering clutch is disengaged and the machine turns gradually. If the lever is moved more, the steering brake is applied and the machine will turn on the spot. 2-l 6