. OPERATION OPERATION STOPPING ENGINE NOTICE Except when stopping in emergencies, run the engine at low idle to cool it down gradually after operations. If the engine is stopped without allowing it to cool down, the turbocharger is still rotating under inertia, so there will be lack of lubricating oil and this will reduce the service life of the machine. 3 - 95 REMAR If t he e ngine overheats, " E02 ENGINE OVERHEAT" is displayed on the character display and the engine output is a utomatically limited. Run the lam p go . Set the s hift lever to t he N position , the n set the p arking b rake switch to the PARKIN . Lower t position. .
Ru n the engine at Lo w idle (MIN) f or a pproximate ly 5 minutes to c ool d own graduall y. . Tur n the key of starti ng switch (1) to O FF positio n to sto p the engine. the key from starting switch (1). . Remove the key from starting switch ( NOTICE When th e machine is equipp ed with the externa l power sou rce type electric heater and the ambient tem perature goes below -20 °C (-4°F ), run electricity from the external p owe r supply thr ough the engine oil pan heater and coolant heater immediately after stoppin g the e ngine to preve nt the temperature of the coola nt and e ngine oi l from going down.