. MAINTENANCE SERVICE PROCEDURE CHECK, CLEAN AUTOMATIC SUSPENSION (if equipped) WARNING 4 - 61 When checking or cleaning the automatic s ine suddenly moves durin uspension, al ways do a follows. If the mach g the inspection, there i ry. danger that it may c ause serious personal inju One person shou ld sit in the operator's sea t so that the en gine can b stopped at any ti time. me. All workers should be in communication all th Set the parking b rake switch to the PARKIN G position, the n put block under the tires to prevent the machine from moving. perating the d Do not touch the gear shift lever. Before o ump contro lever, always giv e a signal to the other workers and have them mov ce.
ther wor kers and have them mov back to a safe pla . When bolts of inspection cove r (1) are loosened an d the cove is moved to th e side. The inspection h ole can be s . Check the pos ition of the link. Check that it moves to the following p For normal tra vel when empty : soft (A When the bra ke is depressed : mediu When the dum p lever is at any position other than FL OAT: har (C) If any problem is f ound, please contact yo ur Komatsu distributor for inspection and If operations are c arried out on muddy or w et ground, mu d will stic k to the link, and the movement may bec ome slow so check and clea n.