. ATTACHMENTS, OPTIONS HANDLING PAYLOAD METER II (CARD TYPE) (g) Option code setting 3. If TOTAL/SFT switch (2) is pressed again, the flashing digits will return to the digit for the units and it becomes possible to correct the units again. 4. After completing the correction of the Option Code, press If the number that has been input is not permitted, when MODE switch (3) is pressed, the display will return to Step 1. 6 - 71 1. With the display a t OP.X X (OP.X lights up, dig it fo r units flashes), if it is necessary to correct th e digit for the u nits , press LIGHT/I NC switch ( 1) and correct the number. 2. Press T OTAL/SFT switch ( 2).
The flas hing digit in OP.XX moves o ne place t o th e left and it is possib le to correc t the di git for the tens. igit for the tens, press number. If it is LIGHT/I necessary NC switch ( to corr 1) and ect the d correct the MODE operatio switch (3). n display. The display will return to the normal