. OPERATION EXPLANATION OF COMPONENTS When the machine head lamps are turned on, the icon inside portion (B) of the side lamp switch lights up. 3 - 38 SIDE LAMP SWITCH (if equipped) urn the side lamps on or off. Use this side lamp switch (1) to t When portion (A) of the switch is pressed, the side lamp lights up and the monitor lamp inside porti on (A) of the switch also lights up. When portion (B) of the switch is pressed, the side lamp goes out and the monitor lamp inside porti on (A) of the switch also goes out. MACHINE MONITOR BULB CHECK S WITCH check switch (2) to check the t or not.
the starting switch to the ON Use this machine monitor bulb machine monitor bulb is blow ou Before starting the engine, turn position and press this machine monitor bulb check switch (2) to amps light up properly. check switch is pressed, all the check that the machine monitor l When the machine monitor bulb machine monitor lamps should light up. If any machine monitor replace the bulb. lamp does not light up, repair or LAMP SWITCH Use this lamp switch (3) to turn t he head lamps, clearance lamps, tail lamps, internal illumination of machine monitor, and rear lamps on and off. d to the following positions. il lamps, rear lamps, and internal The tip of the lever can be rotate Position (A):
OFF Position (B): Clearance lamps, ta illumination of mach ine monitor light up p in addition to lamps at position Position (C): Head lamps light u (B) (clearance lam internal illumination ps, tail lamps, rear lamps, and of machine monitor) TURN SIGNAL LEVER Use this turn signal lever (3) to direction of turning. Position (A) (right turn): Turn sig make the turn signal flash in the nal on right side of machine turn signal indicator lamp on monitor also flashes. not actuated. flashes, machine Position (B) (center): Lamps are Position (C) (left turn): Turn sign al on left side of machine flashes, turn sign monitor al al indicator lamp on machine so flashes.
Operate the lever in the direction of turning, then turn the machine with the steering wh eel. When the steeri ng whee is returned, the turn signal lever also returns automatically to the center return automatically, return it to t